Solar Impulse: pushing technology to the limits
Much more than a rich man's toy, the Solar Impulse project is the driving
force behind ground-breaking scientific innovations coming out of Switzerland's
most prestigious technological institution.
Packed with cutting-edge technology, rather than becoming the plane of the
future, the ambition of the Solar Impulse project is to push the boundaries of
science technology and reveal new possibilities of harnessing solar
energy.
"The aim is to develop a strong symbol capable of attractively promoting
pioneering spirit and innovation, of motivating people to challenge themselves
to ambitious goals, in particular in the area of clean and renewable energy
technologies," said pilot and adventurer Bertrand Piccard when launching the
project in 2003.
Since its launch, the Solar Impulse project has been developed in
collaboration with the Swiss Federal Institute of Technology Lausanne (EPFL),
where scientists and researchers from 20 different laboratories have been
involved in the project.
EPFL head of science for strategic partnerships Pascal Vuilliomenet says a
project like Solar Impulse stimulates research by pushing scientists to their
limits to create something that might otherwise not exist.
"It also allows professors, assistants, and students from the different
laboratories to work together and thus create links that might otherwise not be
created," he says. "It can also attract future potential students. For example,
a high school student who doesn't understand what a materials engineer can do,
we can explain that to them with real examples."
Such examples can be found in the fact that the Solar Impulse needs to be
both very light, and very solid to make its journey around the world using
nothing but energy from the sun. Two separate laboratories at the EPFL have
worked on optimising composite materials manufactured by Swiss companies North
TPT, which produces base materials from a mix of carbon fibre and resin, and
Decision SA, which builds structures with them.
"It's a bit like cooking: according to the piece you are trying to make,
you need to cook it at certain temperature and pressure for a certain amount of
time," says Vuilliomenet.
The result is that the structure of the Solar Impulse is lighter and more
solid than what would otherwise be common. And the knowledge acquired during the
research process can be commercialised by the two Swiss companies for use in
other products such as ships or satellites.
Maximum power
Making the plane as light as possible goes hand in hand with harnessing
energy from the sun. While the 17,248 solar cells that cover the wings of the
plane are not particularly revolutionary, they too have been stripped down to
make them as light as possible. Unlike solar panels mounted on buildings, the
panels on the plane cannot be encased in glass, so the EPFL has tested a new
super light-weight, transparent and flexible plastic developed by Belgian
chemicals giant Solvay. Again, the technological advances made in developing
this material could have commercial applications in building construction.
Solvay has also developed new components for batteries which increase their
storage capacity by 10% while reducing their weight by 2%.
Scientists at the EPFL have also applied themselves to the question of how
the Solar Impulse can best use the small amount of power it does have. The
results of their research into ways to optimise the flow of energy between the
solar cells, batteries and motors were sent to Neuchâtel-based manufacturer Etel
which was then able to develop motors with a yield of 96%.
While it may only be a gain of a few points compared to current motors, it
is still a record, says Vuilliomenet.
"Without an exceptional project like Solar Impulse, we wouldn't have
invested the funds, the time or the energy necessary to achieve it, and then to
extend it to the market as a whole," he says. "And even if it is minimal, it is
still interesting. It's another brick of knowledge that will be available for
use by others in other fields, perhaps outside of aviation, and so it could have
a much more important impact."
Some impacts are less expected: Swiss manufacturer of elevators, escalators
and moving walkways, Schindler, has just launched its first solar-powered
elevator for which the energy management process was directly inspired by the
company's collaboration with Piccard and the EPFL.
Wake up!
Yet another partner in the project, Swiss watchmaker OMEGA, has developed a
converter to power the cockpit electronics - which function at a weaker voltage
than the motors - that it says is "lighter, more compact and more efficient than
other similar products available on the market".
Still in the cockpit, particular attention is paid to the body shape of
the pilot, who must sometimes continuously stay at the controls for several days
and nights without sleeping more than 20 minutes at a time.
"They have sensors for monitoring breathing, heart rate, and brain
activity, cameras which monitor the movements of the eyes and chin muscles,"
explains Emmanuel Barraud, spokesperson for the EPFL. "What is new here, is that
they have developed a micro-computer that is very light and very energy
efficient that can calculate the data and tell with certainty whether the pilot
is sleeping."
If the pilot blinks his eyes, it could simply be the effect of the sun or
dehydration, but if at the same time the chin relaxes and the heart beat slows,
he is sure to be sleeping, in which case the computer will activate an
alarm.
"This is technology that could be used in cars," suggests Barraud.
"Obviously we are not going to put on a helmet covered in electrodes every time
we get behind the wheel, but even with just the eyes, we can capture some very
interesting elements about the state of sleepiness in a driver."
Ingen kommentarer:
Legg inn en kommentar
Merk: Bare medlemmer av denne bloggen kan legge inn en kommentar.